LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Taurus LX, 3.0 2, AX4N >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 3 (Engine - 3.0L V6 - VIN S & 1) >> Removal & Installation >> Oil Pan >> Escape >> Removal

Oil Pan: Escape: Removal

WARNING: This page is about a different variant/trim than selected.
  1. Remove the flexible exhaust pipe. .
  2. Disconnect the downstream catalyst monitor sensor.
    Fig 1: Disconnecting Downstream Catalyst Monitor Sensor
    G03429793Courtesy of FORD MOTOR CO.
  3. Drain the oil.
  4. Install the drain plug.
    Fig 2: Installing Drain Plug
    G03429794Courtesy of FORD MOTOR CO.
  5. Remove and discard the oil filter.
  6. Remove the 15 bolts.
    Fig 3: Removing Oil Pan Bolts
    G03429795Courtesy of FORD MOTOR CO.
  7. Remove the three bolts and the oil pan.
    Fig 4: Removing Three Bolts & Oil Pan
    G03429796Courtesy of FORD MOTOR CO.
scientia non olet · About LEMON Manuals