LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Taurus LX, 3.0 2, AX4N >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 3 (Engine - 3.0L V6 - VIN S & 1) >> Removal & Installation >> Exhaust Manifold >> Removal (Front)

Removal (Front)

WARNING: This page is about a different variant/trim than selected.
  1. Disconnect negative battery cable. Raise and support vehicle. Remove front exhaust manifold-to-exhaust pipe nuts. Remove coolant bracket tube nut. Disconnect heated oxygen sensor connector. Remove front splash shield.
  2. Remove lower exhaust manifold nuts. Remove thermostat housing bracket bolt. Lower vehicle. Remove nuts attaching front exhaust manifold and gasket. Remove manifold from vehicle.