LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Taurus LX, 3.0 2, AX4N >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 3 (Engine - 3.0L V6 - VIN S & 1) >> Overhaul >> Cylinder Head >> Valve Seat

Valve Seat

WARNING: This page is about a different variant/trim than selected.
  1. Inspect valve seat for evidence of roughness or pitting at valve contact surface. Reface seat as necessary. Before refacing valve seats, check stem clearance. If clearance is not within specification, replace components as necessary. See CYLINDER HEAD  table under ENGINE SPECIFICATIONS.
  2. Measure valve seat width. See CYLINDER HEAD  table under ENGINE SPECIFICATIONS. If servicing valve seats, valves must be serviced or replaced. Valve seat replacement information is not available from manufacturer.
scientia non olet · About LEMON Manuals