Cylinder Block Specifications
WARNING: This page is about a different variant/trim than selected.
CYLINDER BLOCK
| Application | In. (mm) | ||||
|---|---|---|---|---|---|
| Cylinder Bore | |||||
| Standard Diameter | |||||
| Grade 1 | 3.5039-3.5043 (89.00-89.01) | ||||
| Grade 2 | 3.5043-3.5047 (89.01-89.02) | ||||
| Grade 3 | 3.5047-3.5051 (89.02-89.03) | ||||
| Maximum Taper | .0002 (.005) | ||||
| Maximum Out-Of-Round | .0007 (.018) | ||||
| Maximum Deck Warpage | (1) | ||||
|
|||||