Crankshaft, Main Bearings & Connecting Rod Bearings Specifications
WARNING: This page is about a different variant/trim than selected.
CRANKSHAFT, MAIN & CONNECTING ROD BEARINGS
| Application | In. (mm) | ||||
|---|---|---|---|---|---|
| Crankshaft End Play | |||||
| Standard | .004-.009 (.102-.229) | ||||
| Service Limit | (1) | ||||
| Main Bearings | |||||
| Journal Diameter | 2.467-2.479 (62.662-62.966) | ||||
| Journal Out-Of-Round | .0012 (.03) | ||||
| Journal Taper | .0012 (.03) | ||||
| Oil Clearance | |||||
| Standard | .0009-.0018 (.023-.046) | ||||
| Service Limit | .0019 (.048) | ||||
| Connecting Rod Bearings | |||||
| Journal Diameter | 1.967-1.968 (49.962-49.987) | ||||
| Journal Out-Of-Round | .0012 (.03) | ||||
| Journal Taper | .0012 (.03) | ||||
| Oil Clearance | |||||
| Standard | .0011-.0025 (.028-.064) | ||||
| Service Limit | (1) | ||||
|
|||||