Camshaft Specifications
WARNING: This page is about a different variant/trim than selected.
CAMSHAFT
| Application | In. (mm) | ||||
|---|---|---|---|---|---|
| End Play | |||||
| Standard | .0010-.0065 (.025-.165) | ||||
| Service Limit | .0074 (.190) | ||||
| Journal Diameter | |||||
| (All Journals) | 1.060-1.061 (26.924-26.949) | ||||
| Journal Runout | (1) | ||||
| Lobe Lift | |||||
| Intake & Exhaust | |||||
| Standard | .188 (4.78) | ||||
| Service Limit | .187 (4.75) | ||||
| Oil Clearance (All Journals) | |||||
| Standard | .0010-.0030 (.025-.076) | ||||
| Service Limit | .0047 (.120) | ||||
|
|||||