LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Taurus LX, 3.0 2, AX4N >> Repair and Diagnosis >> External Pages >> Different car >> Section 983 (Seat System -- F250-F550 Super Duty) >> Removal And Installation >> Seat - Front, 20 Percent >> Removal

Seat - Front, 20 Percent: Removal

WARNING: This page is about a different car, the 2007 Ford Pickup, 2007 Ford F550 Super Duty, 2007 Ford F450 Super Duty, and 2007 Ford Cab & Chassis. However, it is still accessible from the selected car via links, so may be relevant.
NOTE: New bolts must be installed, do not reuse the bolts that were removed.
  1. Remove the front seats. For additional information, refer to Seat - Front, With Seat Integrated Restraints (SIR)  or Seat - Front, Bucket and 40 Percent  in this article.
  2. Remove and discard the 20 percent seat riser-to-floor RH rear bolt.
    Fig 1: Identifying 20 Percent Seat Riser-To-Floor RH Rear Bolt
    GF0004972Courtesy of FORD MOTOR CO.
  3. Remove the 20 percent seat riser-to-floor LH rear nut.
    Fig 2: Identifying 20 Percent Seat Riser-To-Floor LH Rear Nut
    GF0004973Courtesy of FORD MOTOR CO.
  4. Remove the seat.
scientia non olet · About LEMON Manuals