LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Taurus LX, 3.0 2, AX4N >> Repair and Diagnosis >> External Pages >> Different car >> Section 983 (Seat System -- F250-F550 Super Duty) >> Disassembly And Assembly >> Seat Cushion - Front, 20 Percent >> Disassembly

Seat Cushion - Front, 20 Percent: Disassembly

WARNING: This page is about a different car, the 2007 Ford Pickup, 2007 Ford F550 Super Duty, 2007 Ford F450 Super Duty, and 2007 Ford Cab & Chassis. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the front seats. For additional information, refer to Seat - Front, With Seat Integrated Restraints (SIR)  or Seat - Front, Bucket and 40 Percent  in this article.
  2. Remove the front seat. For additional information, refer to Seat - Front, 20 Percent  in this article.
  3. Remove the seat backrest. For additional information, refer to Seat Backrest - Front, 20 Percent  in this article.
  4. Remove the seat latch. For additional information, refer to Seat Latch - 20 Percent  in this article.
  5. Remove the LH seat backrest bracket retaining bolts.
    Fig 1: Removing LH Seat Backrest Bracket Retaining Bolts
    GF0005075Courtesy of FORD MOTOR CO.
    6. NOTE: LH shown, RH similar.
    Fig 2: Removing Seat Riser Retaining Bolts
    GF0005076Courtesy of FORD MOTOR CO.
  6. Remove the 5 RH and LH seat riser retaining bolts.
  7. Unfasten the J-clips. Remove the seat cushion foam pad.
    Fig 3: Identifying Seat Cushion Foam Pad J-Clips
    GF0005077Courtesy of FORD MOTOR CO.
scientia non olet · About LEMON Manuals