LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Taurus LX, 3.0 2, AX4N >> Repair and Diagnosis >> External Pages >> Different car >> Section 982 (Interior Trim And Ornamentation -- F250-F550 Super Duty) >> Removal And Installation >> Cab Rear Trim Panel - Crew Cab >> Removal And Installation

Removal And Installation

WARNING: This page is about a different car, the 2007 Ford Pickup, 2007 Ford F550 Super Duty, 2007 Ford F450 Super Duty, and 2007 Ford Cab & Chassis. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the child safety seat tether anchor. For additional information, refer to SAFETY BELT SYSTEM article.
  2. Remove the RH and LH C-pillar trim panels. For additional information, refer to C-Pillar Trim Panel - Crew Cab  in this article.
  3. Remove the 4 pin-type retainers.
  4. Fig 1: Locating 4 Pin-Type Retainers
    GF0004846Courtesy of FORD MOTOR CO.
  5. Remove the cab rear trim panel.
  6. To install, reverse the removal procedure.