LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Taurus LX, 3.0 2, AX4N >> Repair and Diagnosis >> External Pages >> Different car >> Section 964 (Windows And Glass -- F250-F550 Super Duty) >> Diagnostic Tests >> Glass, Frames and Mechanisms >> Pinpoint Tests >> Pinpoint Test E: A Single Power Window Is Inoperative - LH or RH Rear >> Rear Window Operation From the LH Front Window Control Switch

Rear Window Operation From the LH Front Window Control Switch

WARNING: This page is about a different car, the 2007 Ford Pickup, 2007 Ford F550 Super Duty, 2007 Ford F450 Super Duty, and 2007 Ford Cab & Chassis. However, it is still accessible from the selected car via links, so may be relevant.

When the LH rear window is operated DOWN from the LH front window control switch, power is sent to the LH rear window control switch through circuit 317 (GY/OG) and ground through circuit 316 (YE/LB). The LH rear window control switch transfers power to the LH rear window motor through circuit 885 (YE/LB) and ground through circuit 884 (YE/BK). When the RH rear window is operated DOWN from the LH front window control switch, power is sent to the RH rear window control switch through circuit 319 (YE/BK) and ground through circuit 320 (RD/BK). The RH rear window control switch transfers power to the RH rear window motor through circuit 882 (BN/YE) and ground through circuit 881 (BN).

When the LH rear window is operated UP from the LH front window control switch, power is sent to the LH rear window control switch through circuit 316 (YE/LB) and ground through 317 (GY/OG). The LH rear window control switch transfers power to the LH rear window motor through circuit 884 (YE/BK) and ground through circuit 885 (YE/LB). When the RH rear window is operated UP from the LH front window control switch, power is sent to the RH rear window control switch through circuit 320 (RD/BK) and ground through circuit 319 (YE/BK). The RH rear window control switch transfers power to the RH rear window motor through circuit 881 (BN) and ground through circuit 882 (BN/YE).