LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Taurus LX, 3.0 2, AX4N >> Repair and Diagnosis >> External Pages >> Different car >> Section 957 (Climate Control - F250-F550) >> Removal And Installation >> Automatic Temperature Control Solenoid and Manifold >> Removal And Installation

Removal And Installation

WARNING: This page is about a different car, the 2007 Ford Pickup, 2007 Ford F550 Super Duty, 2007 Ford F450 Super Duty, and 2007 Ford Cab & Chassis. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the audio unit. For additional information, refer to INFORMATION AND ENTERTAINMENT SYSTEMS article.
  2. Disconnect the automatic temperature control (ATC) solenoid and manifold.
    1. Disconnect the vacuum connector.
    • Disconnect the electrical connector.
    Fig 1: Locating Automatic Temperature Control (ATC) Solenoid And Manifold
    GF0008024Courtesy of FORD MOTOR CO.
  3. Remove the screw and remove the ATC solenoid and manifold.
    Fig 2: Identifying ATC Solenoid And Manifold Screw
    GF0008025Courtesy of FORD MOTOR CO.
  4. To install, reverse the removal procedure.
scientia non olet · About LEMON Manuals