All engines

WARNING: This page is about a different car, the 2007 Ford Pickup, 2007 Ford F550 Super Duty, 2007 Ford F450 Super Duty, and 2007 Ford Cab & Chassis. However, it is still accessible from the selected car via links, so may be relevant.

Drain the cooling system. For additional information, refer to Cooling System Draining, Filling and Bleeding in this article.
Remove the air cleaner outlet tube.
Disconnect the upper radiator hose and the degas bottle hose.
Disconnect the lower radiator hose retainer from the cooling fan shroud.

Fig 1: Disconnecting Lower Radiator Hose Retainer From Cooling Fan Shroud

Courtesy of FORD MOTOR CO.

Carefully position the fan and the fan clutch into the shroud.
Remove the 2 cooling fan shroud bolts, the shroud, fan and clutch.
- To install, tighten to 6 N.m (53 lb-in).

Fig 1: Removing 2 Cooling Fan Shroud Bolts

Courtesy of FORD MOTOR CO.

To install, reverse the removal procedure.