DTC P1336: Crankshaft Position (CKP) and/or Camshaft Position (CMP) Input Signal to the PCM Concerns
WARNING: This page does not describe the selected car, but rather 32 other vehicles, including the 2005 Mercury Sable, 2005 Mercury Mountaineer, 2005 Mercury Monterey, 2005 Mercury Montego, and 2005 Mercury Mariner. However, it is still accessible from the selected car via links, so may be relevant.
P1336 - CRANKSHAFT POSITION (CKP) AND/OR CAMSHAFT POSITION (CMP) INPUT SIGNAL TO PCM CONCERNS
| Description: | The input signal to the powertrain control module (PCM) from the CKP sensor and/or the CMP sensor is erratic. | ||
| Possible Causes: |
|
||
| Diagnostic Aids: | Check the harness for routing, alterations, improper shielding, or electrical interference from other improperly functioning systems. | ||
| Application | Key On Engine Off | Key On Engine Running | Continuous Memory |
| All | - | - | GO to JD: Crankshaft Position (CKP) Sensor STEP JD1. |