DTC P0722: Output Shaft Speed (OSS) Sensor Circuit No Signal
WARNING: This page does not describe the selected car, but rather 32 other vehicles, including the 2005 Mercury Sable, 2005 Mercury Mountaineer, 2005 Mercury Monterey, 2005 Mercury Montego, and 2005 Mercury Mariner. However, it is still accessible from the selected car via links, so may be relevant.
P0722 - OUTPUT SHAFT SPEED (OSS) SENSOR CIRCUIT NO SIGNAL
| Description: | The OSS sensor failed to provide a signal to the PCM upon initial movement of vehicle. | ||
| Possible Causes: |
|
||
| Diagnostic Aids: | Check the wiring, connector, and sensor for damage. | ||
| Application | Key On Engine Off | Key On Engine Running | Continuous Memory |
| Manual transmission | - | - | GO to TJ: Output Shaft Speed (OSS) Sensor STEP TJ1. |
| All others | Refer to AUTOMATIC TRANSMISSION . | ||