DTC P0704: Clutch Pedal Position (CPP) Switch Malfunction
WARNING: This page does not describe the selected car, but rather 32 other vehicles, including the 2005 Mercury Sable, 2005 Mercury Mountaineer, 2005 Mercury Monterey, 2005 Mercury Montego, and 2005 Mercury Mariner. However, it is still accessible from the selected car via links, so may be relevant.
P0704 - CLUTCH PEDAL POSITION (CPP) SWITCH MALFUNCTION
| Description: | When the clutch pedal is applied the voltage goes to low. If the powertrain control module (PCM) does not see this change from high to low the DTC is set. | ||
| Possible Causes: |
|
||
| Diagnostic Aids: | When the clutch pedal is applied and then released, the CPP switch voltage should cycle. | ||
| Application | Key On Engine Off | Key On Engine Running | Continuous Memory |
| All | GO to TA: Clutch Pedal Position (CPP) Switch STEP TA1. | - | GO to TA: Clutch Pedal Position (CPP) Switch STEP TA1. |