PTO Circuits Description
WARNING: This page does not describe the selected car, but rather 32 other vehicles, including the 2005 Mercury Sable, 2005 Mercury Mountaineer, 2005 Mercury Monterey, 2005 Mercury Montego, and 2005 Mercury Mariner. However, it is still accessible from the selected car via links, so may be relevant.
The 3 PTO input circuits are PTO mode, PTO engage, and PTO RPM.
The PTO engage circuit is used when the operator is requesting the PCM to check the needed inputs required to initiate the PTO engagement.
The PTO RPM circuit is used while the operator request additional engine RPM for PTO operation.