LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Taurus LX, 3.0 2, AX4N >> Repair and Diagnosis >> External Pages >> Different car >> Section 918 (Hydraulic Brake System Actuation - F150 & Mark LT) >> Removal And Installation >> Brake Pedal Motor Cable >> Removal And Installation

Removal And Installation

WARNING: This page is about a different car, the 2007 Lincoln Mark LT and 2007 Ford Pickup. However, it is still accessible from the selected car via links, so may be relevant.
    NOTE: The accelerator pedal and the brake pedal must be in the same position before connecting the adjustable brake pedal cable.
  1. Release the brake pedal motor cable from the brake pedal transmission assembly.
  2. Release the brake pedal motor cable from the brake pedal motor.
  3. To install, reverse the removal procedure.
scientia non olet · About LEMON Manuals