Removal And Installation

WARNING: This page is about a different car, the 2007 Lincoln Mark LT and 2007 Ford Pickup. However, it is still accessible from the selected car via links, so may be relevant.

Remove the transmission fluid filler tube bolt from the side of the RH cylinder head.
- To install, tighten to 12 Nm (9 lb-ft).

Fig 1: Locating Transmission Fluid Filler Tube Bolt

Courtesy of FORD MOTOR CO.

Remove the transmission fluid filler tube.

Fig 2: Locating Transmission Fluid Filler Tube
Courtesy of FORD MOTOR CO.
To install, reverse the removal procedure.