LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Taurus LX, 3.0 2, AX4N >> Repair and Diagnosis >> External Pages >> Different car >> Section 857 (Automatic Transmission - 4R70E/4R75E - F150 & Mark LT) >> In-Vehicle Servicing >> Reverse Servo Assembly >> Removal

Reverse Servo Assembly: Removal

WARNING: This page is about a different car, the 2007 Lincoln Mark LT and 2007 Ford Pickup. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the main control valve body. For additional information, refer to Main Control Valve Body  in this article.
  2. Using the special tool, remove the reverse band servo retaining ring.
    1. Compress the servo spring.
    2. Remove the reverse band servo retaining ring.
    3. Fig 1: Removing Reverse Band Servo Retaining Ring Using Special Tool
    GF0003519Courtesy of FORD MOTOR CO.
  3. Remove the reverse servo assembly.
    • Remove the reverse band servo cover.
    • Remove the reverse band servo piston and rod.
    • Remove the reverse band servo spring.
    4. Fig 2: Removing Reverse Servo Assembly
    GF0003520Courtesy of FORD MOTOR CO.
scientia non olet · About LEMON Manuals