LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Taurus LX, 3.0 2, AX4N >> Repair and Diagnosis >> External Pages >> Different car >> Section 857 (Automatic Transmission - 4R70E/4R75E - F150 & Mark LT) >> In-Vehicle Servicing >> 1-2 Accumulator >> Installation

1-2 Accumulator: Installation

WARNING: This page is about a different car, the 2007 Lincoln Mark LT and 2007 Ford Pickup. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the 1-2 shift accumulator assembly.
    • Install the 1-2 accumulator upper spring.
    • Install the 1-2 accumulator piston.
    • Install the inner and outer 1-2 accumulator springs.
    • Install the 1-2 accumulator cover.
    2. Fig 1: Identifying 1-2 Shift Accumulator Assembly
    GF0003534Courtesy of FORD MOTOR CO.
  2. Compress the 1-2 accumulator piston and remove the accumulator piston retaining ring.
    3. Fig 2: Locating Accumulator Piston Retaining Ring
    G03888654Courtesy of FORD MOTOR CO.
  3. Install the transmission fluid pan and filter. For additional information, refer to Fluid Pan, Gasket and Filter .
scientia non olet · About LEMON Manuals