LH cylinder head

WARNING: This page is about a different car, the 2007 Ford Pickup. However, it is still accessible from the selected car via links, so may be relevant.

Remove the LH exhaust manifold.
1. Remove and discard the nuts.
2. Remove the LH exhaust manifold.
3. Remove and discard the LH exhaust manifold gasket.
- Inspect the exhaust manifold. For additional information, refer to ENGINE SYSTEM - GENERAL INFORMATION article.
Fig 1: Identifying LH Exhaust Manifold Gasket
Courtesy of FORD MOTOR CO.
Remove and discard the 8 LH exhaust manifold-to-cylinder head studs.

Fig 2: Locating LH Exhaust Manifold-To-Cylinder Head Studs

Courtesy of FORD MOTOR CO.

Remove the bolt and the oil level indicator tube.

Fig 3: Locating Oil Level Indicator Tube

Courtesy of FORD MOTOR CO.