LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Taurus LX, 3.0 2, AX4N >> Repair and Diagnosis >> External Pages >> Different car >> Section 855 (Engine - 4.6L (2V) - F-150) >> In-Vehicle Servicing >> Oil Pan >> Installation >> 4WD vehicles

4WD vehicles

WARNING: This page is about a different car, the 2007 Ford Pickup. However, it is still accessible from the selected car via links, so may be relevant.
  1. Position the front axle.
    2. Fig 1: Positioning Front Axle
    GF0002637Courtesy of FORD MOTOR CO.
    NOTE: Rotate the steering column so the pinch bolt for the steering column coupling allows clearance for the isolator bolt.
  2. Install the upper front axle carrier mounting bushing bolt.
    • Tighten to 90 Nm (66 lb-ft).
    3. Fig 2: Locating Upper Front Axle Carrier Mounting Bushing Bolt
    GF0002638Courtesy of FORD MOTOR CO.
  3. Install the axle shaft housing carrier bushing nut and bolt.
    • Tighten to 90 Nm (66 lb-ft).
    4. Fig 3: Identifying Axle Tube Bushing Nut And Bolt
    GF0002639Courtesy of FORD MOTOR CO.
  4. Install the lower front axle carrier mounting bushing bolt.
    • Tighten to 90 Nm (66 lb-ft).
    5. Fig 4: Locating Lower Front Axle Carrier Mounting Bushing Bolt
    GF0002640Courtesy of FORD MOTOR CO.
scientia non olet · About LEMON Manuals