LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Taurus LX, 3.0 2, AX4N >> Repair and Diagnosis >> External Pages >> Different car >> Section 848 (Brake System - General Information - F150 & Mark LT) >> Diagnostic Tests >> Brake System >> Component Tests >> Brake Master Cylinder - Bypass Condition

Brake Master Cylinder - Bypass Condition

WARNING: This page is about a different car, the 2007 Lincoln Mark LT and 2007 Ford Pickup. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect the brake lines at the brake master cylinder.
  2. Plug the outlet ports of the brake master cylinder.
  3. Apply the brakes. If brake pedal height cannot be maintained, the brake master cylinder has an internal leak and a new brake master cylinder must be installed.
scientia non olet · About LEMON Manuals