Rear Disc Brake: Removal
WARNING: This page is about a different car, the 2007 Lincoln Mark LT and 2007 Ford Pickup. However, it is still accessible from the selected car via links, so may be relevant.
- Remove the 2 brake caliper guide pin bolts and position the caliper assembly aside.
- Support the caliper assembly using mechanic's wire.
- Remove the brake disc.
CAUTION:
Do not allow the caliper assembly to hang from the brake hose or damage to the hose can occur.
NOTE:
If the brake disc binds on the parking brake shoe and lining, remove the adjustment plug and contract the parking brake shoe and lining.