LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Taurus LX, 3.0 2, AX4N >> Repair and Diagnosis >> External Pages >> Different car >> Section 841 (Engine Controls - Diagnostic Subroutines -- Diesel 6.0L (99P E-Series & 99P F450/550)) >> Diagnostic Trouble Code (DTC) Charts and Descriptions >> P0336 - Crankshaft Position Sensor A Circuit Range/Performance

P0336 - Crankshaft Position Sensor A Circuit Range/Performance

WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2007 Ford RV Cutaway, 2007 Ford Pickup, 2007 Ford F550 Super Duty, 2007 Ford F450 Super Duty, and 2007 Ford Econoline. However, it is still accessible from the selected car via links, so may be relevant.
P0336 - CRANKSHAFT POSITION SENSOR A CIRCUIT RANGE/PERFORMANCE

Description:  The DTC sets when the input signal to the powertrain control module (PCM) from the crankshaft position (CKP) sensor is erratic.
Possible Causes: 
  • CKP circuit noise
  • CKP circuit open in the harness
  • CKP circuit short to ground in the harness
  • CKP circuit short to voltage in the harness
  • CKP sensor
Diagnostic Aids:  An inactive CKP signal causes a no start condition. Monitor the RPM PID while cranking engine. A 0 RPM indicates a CKP concern.
Application    Key On Engine Off  Key On Engine Running  Continuous Memory 
All   refer to PINPOINT TEST D .
scientia non olet · About LEMON Manuals