P2015 - Intake Manifold Runner Position Sensor/Switch Circuit Range/Performance (Bank 1)
WARNING: This page does not describe the selected car, but rather 32 other vehicles, including the 2007 Mercury Mountaineer, 2007 Mercury Monterey, 2007 Mercury Montego, 2007 Mercury Milan, and 2007 Mercury Mariner. However, it is still accessible from the selected car via links, so may be relevant.
P2015 - INTAKE MANIFOLD RUNNER POSITION SENSOR/SWITCH CIRCUIT RANGE/PERFORMANCE (BANK 1)
| Description: | The intake manifold runner control (IMRC) system is monitored for failures. Each DTC distinguishes the corresponding failed bank. The test fails when the system detects the presence of a broken or persistently out of range linkage. | |||
| Possible Causes: |
|
|||
| Diagnostic Aids: | ||||
| Application | Key On Engine Off | Key On Engine Running | Continuous Memory | |
| All | refer to PINPOINT TEST HU . | |||