P0113 - Intake Air Temperature (IAT) Sensor 1 Circuit High
WARNING: This page does not describe the selected car, but rather 32 other vehicles, including the 2007 Mercury Mountaineer, 2007 Mercury Monterey, 2007 Mercury Montego, 2007 Mercury Milan, and 2007 Mercury Mariner. However, it is still accessible from the selected car via links, so may be relevant.
P0113 - INTAKE AIR TEMPERATURE (IAT) SENSOR 1 CIRCUIT HIGH
| Description: | Indicates the sensor signal is greater than the self-test maximum. The IAT sensor maximum is 4.6 volts or -50°C (-58°F). | |||
| Possible Causes: |
|
|||
| Diagnostic Aids: | An IAT V PID reading greater than 4.6 volts with the key ON engine OFF or during any engine operating mode indicates a concern is present. | |||
| Application | Key On Engine Off | Key On Engine Running | Continuous Memory | |
| All | refer to PINPOINT TEST DA . | |||