P0108 - Manifold Absolute Pressure (Map)/Barometric Pressure (BARO) Sensor High
WARNING: This page does not describe the selected car, but rather 32 other vehicles, including the 2007 Mercury Mountaineer, 2007 Mercury Monterey, 2007 Mercury Montego, 2007 Mercury Milan, and 2007 Mercury Mariner. However, it is still accessible from the selected car via links, so may be relevant.
P0108 - MANIFOLD ABSOLUTE PRESSURE (MAP)/BAROMETRIC PRESSURE (BARO) SENSOR HIGH
| Description: | Sensor operating voltage is greater than 5 volts (VREF). As a result it failed above the maximum allowable calibrated parameter. | |||
| Possible Causes: |
|
|||
| Diagnostic Aids: | VREF should be greater than 4.0 volts. The PID reading is in frequency/volts. | |||
| Application | Key On Engine Off | Key On Engine Running | Continuous Memory | |
| All | refer to PINPOINT TEST DM . | |||