Removal and Installation

WARNING: This page is about a different car, the 2006 Mercury Milan, 2006 Lincoln Zephyr, and 2006 Ford Fusion. However, it is still accessible from the selected car via links, so may be relevant.

Remove the C-pillar trim panels. For additional information, refer to C-PILLAR TRIM PANEL .
Remove the rear seat bolsters. For additional information, refer to SEATING .
Fold the rear seats down.
Remove the seat back latch covers.
Remove the high mounted stoplamp. For additional information, refer to EXTERIOR LIGHTING .
Remove the 4 pushpins.
Thread the seat belts through the guides.
To install, reverse the removal procedure.