Removal and Installation

WARNING: This page is about a different car, the 2006 Mercury Milan, 2006 Lincoln Zephyr, and 2006 Ford Fusion. However, it is still accessible from the selected car via links, so may be relevant.

Remove the instrument panel side finish panel.

NOTE: The switch is removed by pushing from behind.

Release the tabs and remove the multi-function switch assembly.
- Disconnect the electrical connectors.
Release the 4 tabs and remove the instrument panel dimmer switch.

Fig 1: Removing Instrument Panel Dimmer Switch
Courtesy of FORD MOTOR CO.
To install, reverse the removal procedure.