Principles of Operation
WARNING: This page is about a different car, the 2006 Mercury Milan, 2006 Lincoln Zephyr, and 2006 Ford Fusion. However, it is still accessible from the selected car via links, so may be relevant.
The smart junction box (SJB) monitors the headlamp switch position by sending a voltage reference signal to the headlamp switch. When the fog lamp switch is engaged, the voltage reference signal is routed to ground.
The fog lamps can be turned on when the following conditions are met:
- The ignition switch is in the RUN or START position.
- The low beam headlamps or the parking lamps are on.
- The high beams are not on.
When the SJB receives an input from the headlamp switch indicating a request for the fog lamps, the SJB provides voltage to the fog lamp relay. When the fog lamp relay is energized, voltage is routed to the fog lamps.