LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Taurus LX, 3.0 2, AX4N >> Repair and Diagnosis >> External Pages >> Different car >> Section 758 (Rear Disc Brakes) >> Removal And Installation >> Rear Disc Brake Shield >> Removal and Installation

Removal and Installation

WARNING: This page is about a different car, the 2006 Mercury Milan, 2006 Lincoln Zephyr, and 2006 Ford Fusion. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the wheel hub and bearing assembly. For additional information, refer to REAR SUSPENSION .
  2. Remove the 3 brake disc shield bolts and the brake disc shield.
    • To install, tighten to 23 Nm (17 lb-ft).
  3. To install, reverse the removal procedure.
scientia non olet · About LEMON Manuals