Removal and Installation
WARNING: This page is about a different car, the 2002 Lincoln LS. However, it is still accessible from the selected car via links, so may be relevant.
- Remove the carpeted package tray trim panel. For additional information, see TRIM PANEL - PACKAGE TRAY .
- Depress the two retaining tabs from the inside of the luggage compartment.
- Lift the high mounted stoplamp up to clear the locator pins and remove the stoplamp assembly.
- To install, reverse the removal procedure.
CAUTION:
Exercise care not to break the locator pins, which are positioned on the high mounted stoplamp assembly at the rear of the vehicle.