Pinpoint Test V: The Stoplamps Are On Continuously - All Stoplamps

WARNING: This page is about a different car, the 2002 Lincoln LS. However, it is still accessible from the selected car via links, so may be relevant.

NOTE: The ignition switch must be cycled from OFF to RUN to enable the SSP feature.

Fig 1: Pinpoint Test V: The Stoplamps Are On Continuously - All Stoplamps (Steps V1-V2)

Courtesy of FORD MOTOR CO.

Fig 2: Pinpoint Test V: The Stoplamps Are On Continuously - All Stoplamps (Steps V2 Cont. -V4)

Courtesy of FORD MOTOR CO.

Fig 3: Pinpoint Test V: The Stoplamps Are On Continuously - All Stoplamps (Step V4 Cont.)

Courtesy of FORD MOTOR CO.