LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Taurus LX, 3.0 2, AX4N >> Repair and Diagnosis >> External Pages >> Different car >> Section 721 (Exterior Trim And Ornamentation) >> Removal And Installation >> Quarter Panel Molding >> Removal and Installation

Removal and Installation

WARNING: This page is about a different car, the 2006 Mercury Montego, 2006 Ford Freestyle, and 2006 Ford Five Hundred. However, it is still accessible from the selected car via links, so may be relevant.
  1. Open the rear door.
  2. Release the rear quarter trim panel molding retaining clips.
    • Starting at the front lower portion of the rear quarter trim panel, moving rearward along the rear quarter trim panel.
    Fig 1: Identifying Quarter Panel Molding
    G04658506Courtesy of FORD MOTOR CO.
  3. Remove the rear quarter trim panel molding.
  4. To install, reverse the removal procedure.
    • It is necessary to install new rear quarter trim panel molding retaining clips anytime the rear quarter trim panel molding is removed.