Removal and Installation
WARNING: This page is about a different car, the 2006 Mercury Montego, 2006 Ford Freestyle, and 2006 Ford Five Hundred. However, it is still accessible from the selected car via links, so may be relevant.
- Remove the fender splash shield. For additional information, refer to REMOVAL AND INSTALLATION .
- Release the fender molding retaining clips from the fender.
- Start at the rear lower portion of the fender molding, moving forward along the fender.
- Remove the fender molding.
- To install, reverse the removal procedure.
- It is necessary to install new fender molding retaining clips anytime the fender molding is removed.