Halfshaft Seal - RH: Installation

WARNING: This page is about a different car, the 2006 Mercury Montego, 2006 Ford Freestyle, and 2006 Ford Five Hundred. However, it is still accessible from the selected car via links, so may be relevant.

CAUTION: Make sure the halfshaft seal, the halfshaft seal bore and the halfshaft are clean and dry. Do not oil the halfshaft seal or leakage will occur.

NOTE: Always install a new halfshaft seal.

Fig 1: Identifying Special Tool (205-815)

Courtesy of FORD MOTOR CO.

Using the special tool, install a new halfshaft seal.
Install the RH halfshaft. For additional information, refer to INSTALLATION .