LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Taurus LX, 3.0 2, AX4N >> Repair and Diagnosis >> External Pages >> Different car >> Section 69 (Steering System - General Information) >> Diagnosis And Testing >> Steering System >> Component Tests >> Tie-Rod Articulation Torque

Tie-Rod Articulation Torque

WARNING: This page is about a different car, the 2002 Lincoln LS. However, it is still accessible from the selected car via links, so may be relevant.
    NOTE: This check can be done with the steering gear on or off the vehicle.
  1. Disconnect the tie-rod end from the front wheel spindle. For additional information, see STEERING GEAR .
  2. Move the tie-rod back and forth three times.
  3. Hook the Spring Scale over the tie-rod end or the threaded portion of the tie-rod and measure the force required to move the front wheel spindle tie-rod. For additional information, refer to Tie-Rod Articulation Torque in GENERAL SPECIFICATIONS .
  4. If the force required to move the front wheel spindle tie-rod does not meet the specifications, install a new tie-rod.
scientia non olet · About LEMON Manuals