Removal and Installation

WARNING: This page is about a different car, the 2006 Ford Pickup, 2006 Ford F550 Super Duty, 2006 Ford F450 Super Duty, and 2006 Ford Cab & Chassis. However, it is still accessible from the selected car via links, so may be relevant.

Remove seat back. For additional information, refer to SEAT BACKREST - FRONT, 20 PERCENT .

NOTE: When installing, make sure to position the seat latch spacers in place before tightening the seat latch.

Remove the lower latch retaining bolts, spacers and the latch.
- To install, tighten to 50 Nm (37 lb-ft).
  
  Fig 1: Locating Lower Latch Retaining Bolts And Spacers
  Courtesy of FORD MOTOR CO.
To install, reverse the removal procedure.