LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Taurus LX, 3.0 2, AX4N >> Repair and Diagnosis >> External Pages >> Different car >> Section 672 (Seat System -- F250-F550 Super Duty) >> Removal And Installation >> Seat Backrest - Rear, SuperCab >> Removal and Installation

Removal and Installation

WARNING: This page is about a different car, the 2006 Ford Pickup, 2006 Ford F550 Super Duty, 2006 Ford F450 Super Duty, and 2006 Ford Cab & Chassis. However, it is still accessible from the selected car via links, so may be relevant.
  1. From the bottom of the seat backrest, push the seat backrest upward, then pull the bottom outward and remove from vehicle.
    Fig 1: Locating Rear Seat Backrest - Rear, Supercab
    G04646062Courtesy of FORD MOTOR CO.
  2. NOTE: Make sure all seat backrest hooks are in place.
  3. To install, reverse the removal procedure.
    • Make sure the safety belt is not twisted prior to installation.
    • Make sure the safety belts and buckles are accessible to the occupants after installation.