LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Taurus LX, 3.0 2, AX4N >> Repair and Diagnosis >> External Pages >> Different car >> Section 67 (Air Conditioning) >> Removal And Installation >> Air Conditioning (A/C) Pressure Transducer >> Removal and Installation

Removal and Installation

WARNING: This page is about a different car, the 2002 Lincoln LS. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect the battery.
  2. Disconnect the connector.
    Fig 1: Disconnecting Electrical Connector
    G01274362Courtesy of FORD MOTOR CO.
  3. Remove the pressure transducer.
    Fig 2: Removing Pressure Transducer
    G01274363Courtesy of FORD MOTOR CO.
  4. To install, reverse the removal procedure.
    • Lubricate the O-ring seal with PAG Refrigerant Compressor Oil (R-134a Systems) F7AZ-19589-DA (Motorcraft YN-12-C) or equivalent meeting Ford specification WSH-M1C231-B.
scientia non olet · About LEMON Manuals