Refrigerant Lines

WARNING: This page is about a different car, the 2002 Lincoln LS. However, it is still accessible from the selected car via links, so may be relevant.

The manifold and tube assembly-receiver drier carries the high pressure liquid from the condenser core to the receiver drier, and from the receiver drier to the manifold and tube assembly-thermostatic expansion valve. It attaches to the A/C receiver drier, uses O-ring seals, and also contains the high pressure service port.

The manifold and tube assembly-thermostatic expansion valve carries high pressure liquid to the thermostatic expansion valve and low pressure gas from the thermostatic expansion valve to the manifold and tube assembly-A/C compressor.

The manifold and tube assembly-A/C compressor carries the high pressure gas from the A/C compressor to the condenser core. It also carries the low pressure gas received from the manifold and tube assembly-thermostatic expansion valve to the A/C compressor. The A/C manifold and tube assembly is attached to the A/C compressor, uses O-ring seals, and has:

A Schrader-type valve stem core fitting used to mount the A/C pressure transducer so that the A/C pressure transducer can be removed without discharging the A/C system.
A serviceable high pressure relief valve.
The manifold and tube assembly-A/C compressor used on the V6 and V8 engines are not interchangeable.