Safety Belt Warning Chime
WARNING: This page is about a different car, the 2006 Ford Pickup, 2006 Ford F550 Super Duty, 2006 Ford F450 Super Duty, and 2006 Ford Cab & Chassis. However, it is still accessible from the selected car via links, so may be relevant.
The safety belt warning chime warns that the safety belt is not fastened. The safety belt warning chime sounds when the driver safety belt is not fastened and the ignition switch is turned to the ON or START position.
The safety belt warning chime stops sounding when:
- the safety belt is fastened.
- the ignition switch is turned to the OFF or ACC position.
- the chime has sounded for 6 seconds.
The safety belt warning chime inputs are:
- the ignition switch START position (clutch pedal pressed).
- the ignition switch ON position.
- the driver safety belt switch.
The output is the instrument cluster chime.