LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Taurus LX, 3.0 2, AX4N >> Repair and Diagnosis >> External Pages >> Different car >> Section 657 (Fuel Tank & Fuel Lines - Gasoline And Diesel - F250-F550 Super Duty) >> Removal And Installation >> Inertia Fuel Shutoff (IFS) Switch >> Removal and Installation

Removal and Installation

WARNING: This page is about a different car, the 2006 Ford Pickup, 2006 Ford F550 Super Duty, 2006 Ford F450 Super Duty, and 2006 Ford Cab & Chassis. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the RH cowl side trim panel. For additional information, refer to INTERIOR TRIM AND ORNAMENTATION .
  2. Remove the inertia fuel shutoff (IFS) switch retaining bolts (2 required).
    • To install, tighten to 2 Nm (18 lb-in).
  3. Remove the IFS switch.
  4. To install, reverse the removal procedure.
scientia non olet · About LEMON Manuals