LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Taurus LX, 3.0 2, AX4N >> Repair and Diagnosis >> External Pages >> Different car >> Section 656 (Fuel Charging System - Turbocharger -- F250-F550 Super Duty) >> Removal And Installation >> Turbocharger Pedestal >> Removal and Installation

Removal and Installation

WARNING: This page is about a different car, the 2006 Ford Pickup, 2006 Ford F550 Super Duty, 2006 Ford F450 Super Duty, and 2006 Ford Cab & Chassis. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the turbocharger. For additional information, refer to TURBOCHARGER .
  2. Remove the 4 bolts and the turbocharger pedestal.
    • To install, tighten to 31 Nm (23 lb-ft).
      Fig 1: Locating Turbocharger Pedestal Bolts
      G04649326Courtesy of FORD MOTOR CO.
  3. To install, reverse the removal procedure.
scientia non olet · About LEMON Manuals