LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Taurus LX, 3.0 2, AX4N >> Repair and Diagnosis >> External Pages >> Different car >> Section 649 (Handles, Locks, Latches And Entry Systems) >> Removal And Installation >> Tailgate Lock Cylinder >> Removal and Installation

Removal and Installation

WARNING: This page is about a different car, the 2006 Ford F550 Super Duty, 2006 Ford F450 Super Duty, and 2006 Ford Cab & Chassis. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the tailgate release handle. For additional information, refer to TAILGATE RELEASE HANDLE .
  2. Remove the clip and the tailgate lock cylinder.
  3. To install, reverse the removal procedure.
scientia non olet · About LEMON Manuals