LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Taurus LX, 3.0 2, AX4N >> Repair and Diagnosis >> External Pages >> Different car >> Section 649 (Handles, Locks, Latches And Entry Systems) >> Removal And Installation >> Push Button Rod - Bellcrank, Rear Door, Crew Cab >> Removal and Installation

Removal and Installation

WARNING: This page is about a different car, the 2006 Ford F550 Super Duty, 2006 Ford F450 Super Duty, and 2006 Ford Cab & Chassis. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the rear door push button rod. For additional information, refer to PUSH BUTTON ROD - REAR, CREW CAB .
  2. Remove the rear door push button rod linkage. For additional information, refer to PUSH BUTTON ROD - LINKAGE, HORIZONTAL, REAR DOOR, CREW CAB .
  3. CAUTION: When drilling out the push button rod bellcrank rivet, do not oversize the hole in the door sheet metal.
    NOTE: Use the special tool to install the new rivets.
  4. Remove the push button rod bellcrank.
    1. Remove the rivet mandrel (center).
    2. Drill out the rivet.
    3. Remove the push button bellcrank.
      Fig 1: Identifying Rivet And Push Button Bellcrank
      G04646470Courtesy of FORD MOTOR CO.
  5. To install, reverse the removal procedure.


  1. Remove the rear door push button rod. For additional information, refer to PUSH BUTTON ROD - REAR, CREW CAB .
  2. Remove the rear door push button rod linkage. For additional information, refer to PUSH BUTTON ROD - LINKAGE, HORIZONTAL, REAR DOOR, CREW CAB .
  3. CAUTION: When drilling out the push button rod bellcrank rivet, do not oversize the hole in the door sheet metal.
    NOTE: Use the special tool to install the new rivets.
  4. Remove the push button rod bellcrank.
    1. Remove the rivet mandrel (center).
    2. Drill out the rivet.
    3. Remove the push button bellcrank.
      Fig 1: Identifying Rivet And Push Button Bellcrank
      G04646472Courtesy of FORD MOTOR CO.
  5. To install, reverse the removal procedure.