Removal and Installation

WARNING: This page is about a different car, the 2006 Ford Pickup, 2006 Ford F550 Super Duty, 2006 Ford F450 Super Duty, and 2006 Ford Cab & Chassis. However, it is still accessible from the selected car via links, so may be relevant.

NOTE: Front floor console shown, rear floor console similar.

Open the floor console cover.

Fig 1: Locating Floor Console Cover
Courtesy of FORD MOTOR CO.
Remove the storage compartment.

Fig 2: Locating Storage Compartment
Courtesy of FORD MOTOR CO.
Remove the console tray mat.
Remove the bolts and the floor console.
- If equipped, disconnect the electrical connector.
- To install, tighten to 5 Nm (44 lb-in).
  
  Fig 3: Locating Floor Console Bolts
  Courtesy of FORD MOTOR CO.
To install, reverse the removal procedure.