LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Taurus LX, 3.0 2, AX4N >> Repair and Diagnosis >> External Pages >> Different car >> Section 642 (MULTIFUNCTION Electronic Modules -- F250-F550 Super Duty) >> Removal And Installation >> Upfitter Switch >> Removal and Installation

Removal and Installation

WARNING: This page is about a different car, the 2006 Ford Pickup, 2006 Ford F550 Super Duty, 2006 Ford F450 Super Duty, and 2006 Ford Cab & Chassis. However, it is still accessible from the selected car via links, so may be relevant.

    All vehicles 

  1. Disconnect the battery. For additional information, refer to BATTERY, MOUNTING AND CABLES .
  2. Remove the instrument panel center finish panel. For additional information, refer to INSTRUMENT PANEL AND CONSOLE .

    3. Vehicles with trailer brakes 

  3. Using a suitable tool, press the retaining tab at the top and remove the trailer brake controller module.

    4. Vehicles without trailer brakes 

  4. Using a suitable tool, press the 4 retaining tabs and remove the storage bin.

    5. All vehicles 

  5. Using a suitable tool, press the 4 retaining tabs and remove the upfitter switch.
  6. To install, reverse the removal procedure.
scientia non olet · About LEMON Manuals