LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Taurus LX, 3.0 2, AX4N >> Repair and Diagnosis >> External Pages >> Different car >> Section 640 (Exterior Lighting System) >> Removal And Installation >> Stoplamp Switch >> Removal and Installation

Removal and Installation

WARNING: This page is about a different car, the 2006 Ford F550 Super Duty, 2006 Ford F450 Super Duty, and 2006 Ford Cab & Chassis. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect the stoplamp switch electrical connector and remove the stoplamp switch retaining pin cover.
  2. Remove the retaining pin and slide the stoplamp switch off the brake pedal and the brake booster push rod.
  3. To install, reverse the removal procedure.
scientia non olet · About LEMON Manuals